All Categories
all-categories
The AMS provides intuitive, yet powerful, tools for network configuration, setting administrator and user login credentials; generating floor plans with icons depicting sensor locations and status; customizing sensor interface parameters including unit ID, sensor description, low and high alarms levels, alarm notification delays, logging frequency, email contact groups, and signal preprocessing including rate-of-change tolerance, signal averaging, offset, gain, and range validation; and formatting daily reports to include charts, statistical data, event logs, etc. /Asset/Sensor-ID-Table.jpg
A single 5/16" (8 mm) diameter, rapidly and repeatably responsive probe is inserted into the air stream. A setpoint is established at the low end of the acceptable air flow range just above the desired low air flow alarm threshold. If the air flow rate drops to the setpoint, a yellow WARNING indicator is initiated. If the air flow remains below the setpoint for more than 7 seconds, then a red ALARM indicator begins flashing, an audible alarm is initiated, and the SPDT output relay is thrown. /Asset/AFM-hi-res-1.jpg
Blood/Plasma Rapid Response Thermometers
(2) Hospital and laboratory digital temperature verification systems for blood, red blood cells (RBC), platelets, fresh frozen plasma (FFP - stored and thawed), cryoprecipitates (cryo), and other bagged biologics. /Asset/TC-25-R-3.jpg
Data Logging/Alarm System
(3) The Tº Sentry ALERT Monitoring System (AMS) is a feature rich, PC-based, SQL database logging and alarm notification program that interfaces to one or more Hampshire Controls' TT-150 & TT-200 Battery Operated Wi-Fi Temperature Transmitters and Alarms, MPS Multi-Probe Monitor/Alarms, or Model 140 Single Probe Temperature Monitor/Alarms. The ALERT Monitoring System can log data from any probe sensing a physical parameter that outputs current or voltage including temperature, humidity, [CO2], pressure, air flow, positional displacement, switch status, etc. Sensor data is stored to the SQL database at a programmable frequency.The AMS provides intuitive, yet powerful, tools for network configuration, setting administrator and user login credentials; generating floor plans with icons depicting sensor locations and status; customizing sensor interface parameters including unit ID, sensor description, low and high alarms levels, alarm notification delays, logging frequency, email contact groups, and signal preprocessing including rate-of-change tolerance, signal averaging, offset, gain, and range validation; and formatting daily reports to include charts, statistical data, event logs, etc. /Asset/Sensor-ID-Table.jpg
Laboratory Air Flow Monitors
(4) Hampshire Controls' Air Flow Monitor (AFM) is a single probe instrument used for continuous monitoring of mass air flow levels within laboratory biocontainment cabinets, fume hoods, laminar flow hoods, and ventilation systems. The AFM includes audible and visual alarms and a relay output to activate remote alarm and automatic notification systems.A single 5/16" (8 mm) diameter, rapidly and repeatably responsive probe is inserted into the air stream. A setpoint is established at the low end of the acceptable air flow range just above the desired low air flow alarm threshold. If the air flow rate drops to the setpoint, a yellow WARNING indicator is initiated. If the air flow remains below the setpoint for more than 7 seconds, then a red ALARM indicator begins flashing, an audible alarm is initiated, and the SPDT output relay is thrown. /Asset/AFM-hi-res-1.jpg







